One CDI-500W-EV model automatic machine. Room temp and humidity indicator, Easily to use wash (air/solvent) valving, Solvent pressure pump 2:1 pressure ratio . Digital volume control by the on board computer. Completely piped for low pressure control of the nitrogen blanketing system. A vacuum pump supplying to a vacuum table mounted on ball slides 12.6 in. x 12.6 in. ( 32 cm x 32 cm) to hold your labels 12 in. x 12 in. (31cm x 31cm) flat while doming . 110 V standard, 220 V optional. Less than 10 amps current required Two stainless steel resin pick up tubes with 2" NPT pipe thread for attachment to the drums.

CDI-500W with 8 ft.( 2.44m) leveling table and 25 stacking trays on our stacking pallet are shown.

One solvent pump and pick up tube with 2" NPT for attachment to a five gallon solvent can.
On board covered solvent purge chute and plastic solvent catching plastic container.
Four distributor heads, 1, 4, 6, and 8 nozzles.
Four plastic static mixers.
Approximately 50 ft. of our own rislan tubing to go to the dispensing needles.
30 needles to go into the tubing.
Ten brass needle holders.
One - 1 to 3 splitter, and 3 two way splitters.
One support bar for the needle holders.
Necessary wrenches and tools for the machine. ( set of metric allen wrenches), 16in. and one 10in. adjustable wrench.
Drum wrench to open drums.
One small carpenters level.
Two cans of light 10 W machine oil.
One roll of Teflon tape.
All nitrogen tubing and fittings to go from the CDI-500W-EV to the two resin drums.
Small amount of air line for main air hook up and solvent pump.

Call for current pricing on our best "Turn Key" buy includes all of the above
PLUS the following:

Additional auxiliary equipment supplied in USA by Color-Dec International
One 8 ft. (2.44m) very stable and strong aluminum leveling table. ( supplied in KD form requires about 30 minutes for two person assembly)
25 Aircraft Honeycomb Aluminum 1/4 thick stacking trays 18.5"(59.7cm) x 23.5"(59.7cm).
Two stage Tank regulator for the nitrogen bottle.
Two stacking pallets to hold the trays.
One hand pallet truck to move the stacks after doming.
Two drum carriers ( on wheels ). Granger Item # 2W269
One 5 Gallon ( 20 Liter) Drum with 2 in. NPT opening.
One 5 gallon drum dolly Granger item # 4F987


Optional equipment we can supply at addition cost----
Extensions of the supplied 8 foot (2.44m) standard leveling table ----
Either a four ft. (1.22m)     $650
or eight ft. (2.44m)         $1150
Additional stacking trays @     $45.00 each.
Additional stacking pallets @     $107 each.
We can supply parts to make the leveling table to come off at 90° to the CDI-500W for an additional $150.
Extra resin dispensing Needles 1.5 mm each     $ 3.25
Extra needles ( standard size) 2.0 mm each    $ 2.75
Three way Splitter ( from one tube to three tubes)( E-mail or Call for current prices)
Two way Splitter ( from one tube to two tubes)( E-mail or Call for current prices)
Dispensing heads $345 to $645 4 to 24 nozzles ( E-mail or Call for current prices)

Equipment required to be supplied by customer.

One bottle of Dry Nitrogen (Hospital quality).
Ceiling mounted HE PA Filters at least one two ft. x four ft. for mounting over the leveling table.
Minimum of 1500 CFM exhaust fan with pick up flex mounted over head the CDI-500 W Vacuum table.
Five gallons (20 Liters) of either Methylene Chloride solvent or Acetone supplied in metal drum. Approximately 1 cup of solvent required to purge clean the static mixer, dispensing head, nozzles, tubing and needles.
A non toxic safe solvent is available information provided on request.
One gallon (4 Liters) of Isopropyl Alcohol, sufficient lint free wipers, safety glasses ,
Lint free work smocks for the employees. approx. $30 for 8)
http://www.Granger.com/Granger/productdetail.jsp?xi=xi&ItemId=1611606759
Granger Item No. 4T053
A dust free room adequately air conditioned and ventilated not smaller than 500 sq. ft.( 50 sq. m.)

Affiliated Facilities at Color-Dec Italy, Via Dei Metalmeccanici 41
Zona Industriale Le Bocchette 55040 Capezzano P. (LU) Italy
Tel: 39(0584)3256
Fax 39(0584) 969746